PicToWeave Users Forum
General Weaving Discussion >> New Members Board >> New Guy
http://www.pictoweave.com/cgi-bin/yabb26/YaBB.cgi?num=1219505801

Message started by rodbuilder on Aug 24th, 2008 at 1:36am

Title: New Guy
Post by rodbuilder on Aug 24th, 2008 at 1:36am
Hello from Oklahoma
Hi all i have Sooner Custom Rods in OK. and am new to this board. The only weave i have done is the shark in Dale's book some 20 odd years ago. I have read Jim's book on weaving and have ordered Doc's DVD on weaving and have the Pic to weave i bought from Acid Rod. I would like to buy a used Wonder Weaver as i only have a 50 thread jig and i don't know how to use it for bigger weaves than 50. I can't post on buy and sell as i don't have enough posts.

The weavs on the site are really good looking and i think a weave could really add to a  custom rod.

I have been building for about 25-30 years and love it.

Thanks for reading and have a great day.
Remember the best time to go fishing is when you get the urge.

Paul  :)

Title: Re: New Guy
Post by Owen Dare on Aug 24th, 2008 at 8:08am
G'day Paul.
We're very happy to have you aboard.
If we can help in any way at all, just yell.

As far as the WW goes, I'll adjust your count so you can place a want ad.
Personally I prefer to use a standard type loom up to 100 threads and switch to the WW for the ones over.
I just find it easier to read one of Doc's looms quickly because all the numbers are more or less pointing straight at you.
The WW is a fine tool though and I wouldn't be without one.

cheers,
Owen

Title: Re: New Guy
Post by Sandy D on Aug 25th, 2008 at 7:18am
Hi Paul welcome to the forum.
Have a look at the post by Fiesta he made his Own weave jig and it has come up really well.
Go to

PicToWeave Users Forum General Category User Projects A pattern to share and be critiqued

Good luck and as Owen said if you need any help we are more then willing to lend a hand.

Title: Re: New Guy
Post by rodbuilder on Aug 25th, 2008 at 7:59am
Thanks Sandra i have sent him an e-mail for the jig plans if he is willing to share.
Have a great day
Paul

Title: Re: New Guy
Post by Raymond Adams on Aug 29th, 2008 at 9:59am
Hi Paul,

If ya have any questions just holler OK

PicToWeave Users Forum » Powered by YaBB 2.6.11!
YaBB Forum Software © 2000-2017. All Rights Reserved.